Coiled Power Lead Extender for Tourmaster's Synergy 2.0 electrical riding apparel. Designed to operate in all weather conditions from a vehicle's 12-volt electrical system.
. Tourmaster Synergy 2.0 Electric Insoles Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. NOTE: Synergy 2.0 Heated Insoles require a powerlead wiring harness extended V-Split connector and rheostat controller if used individually (parts sold seperately) Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
. Tourmaster Synergy 2.0 Electric Jacket Liner Synergy jacket include a power lead wiring harness temperature control unit and a thigh-mounted leg band to attach the temperature control unit. Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
. Tourmaster Synergy 2.0 Electric Vest Liner Synergy vest include a power lead wiring harness temperature control unit and a thigh-mounted leg band to attach the temperature control unit. Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
. Tourmaster Synergy 2.0 Electric Vest Liner with Collar Synergy vest include a power lead wiring harness temperature control unit and a thigh-mounted leg band to attach the temperature control unit. Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
. Tourmaster Synergy 2.0 Electric Chap Liner Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. NOTE: Pant and chap liners require a power lead wiring harness and rheostat controller if used individually (parts sold seperately). Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
. Tourmaster Synergy 2.0 Electric Pant Liner Tour Master Synergy 2.0 apparel is designed to operate from a vehicle's standard 12-volt electrical system to provide unmatched levels of warmth and comfort. With Synergy 2.0 apparel wearers can be warm without the bulk and discomfort typically caused by excessive layers of clothing. By providing increased warmth and mobility in cold temperatures Synergy 2.0 apparel helps reduce fatigue while increasing safety and enjoyment. Each Synergy 2.0 garment is heated by a series of durable steel fiber heating elements which generate safe electronically controlled infrared heat. In addition to safe and even heating the steel fiber elements are lightweight flexible and safe to operate in wet conditions. It is flexibility that allows Synergy 2.0 garments to fit comfortably under protective riding apparel. A new feature for your Synergy 2.0 heated apparel is the addition of a temperature sensor to each garment. This sensor allows your jacket to remain at a set temperature for the duration of a ride. It also serves as an emergency backup should your jacket get too hot. Combined with the I5A built in fuse in the wiring harness you can ride in confidence knowing you are safe. To ensure the best possible performance it is important that Synergy 2.0 apparel be form-fitting and fit snugly without hindering wearer movement or comfort. Heat is transferred to the wearer through close contact between the garment and the wearer's body. It is recommended that no more than one thin layer of clothing be worn under Synergy electrically heated apparel. Thick layers such as sweatshirts and sweatpants increase the space between the garment and the wearer decreasing the effectiveness of the heating elements. Tour Master Synergy 2.0 electrically heated apparel is powered by a 12-volt electrical system. No matter how wearers choose to use Synergy garments only one Synergy 2.0 power lead wiring harness per person is needed. ***WARNING: Connecting Tour Master Synergy electrically heated apparel to any other power source besides your vehicle's 12-volt battery will destroy the heating elements void the warranty and may cause serious injury or death to the wearer. In addition Tour Master Synergy apparel cannot be combined with any other brand of electrically heated apparel. NOTE: Pant and chap liners require a power lead wiring harness and rheostat controller if used individually (parts sold seperately). Additional Accessories/Replacement Parts: Tourmaster Synergy 38 inch Power Lead Tourmaster Synergy Pant Control Tourmaster Synergy Glove Control Tourmaster Synergy Extended V-Split Connector Tourmaster Synergy BMW Socket Adapter Tourmaster Synergy 12-Volt Dc Adapter Tourmaster Synergy Coiled Power Lead Extender Tourmaster Synergy 70 inch Power Lead Tourmaster Synergy Single Rheostat Controller Tourmaster Synergy Dual Rheostat Controller
High Quality Content by WIKIPEDIA articles Synergy+ is a fork of Synergy, a free and open source software application for sharing a keyboard and mouse between computers over a network. The project is hosted on Google Codes project hosting, under the project name, synergyplus. Synergy+ supports Windows Vista and Windows 7, Mac OS X (10.5), and Linux (2.6 kernel). The first version of Synergy (created on May 13, 2001 by Chris Schoeneman, also known as crs ) worked with the X Window System only, but more recent versions of Synergy support Windows XP, Mac OS X (10.2), Linux and other Unix dialects. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 132 Publication Date: 2010/09/03 Language: English Dimensions: 9.02 x 5.98 x 0.31 inches
